Assembly QA Part 4 RR Steps

These steps were revised in 2017, but you can also see the old steps: Releasing an assembly (old steps)

Navigation Menu Home Page Assembly QA Part 1: DEV Steps Assembly QA Part 2: Track Steps Assembly QA Part 3: BETA Steps Assembly QA Part 4: RR Steps

RR: Check that tables do not need to be pushed again

You can use

updateTimesDb.sh -d $db

to compare table update times between hgwdev and hgwbeta. Everything should have the same update times except

hgFindSpec, history, tableDescriptions, trackDb and the genbank tables author, cds, chainRBest*, chainSyn*, cell, description, development, gbCdnaInfo, gbExtFile, gbLoaded gbMiscDiff, gbSeq, gbWarn, geneName, imageClone, keyword, library, mrnaClone, netRBest, netSyn, organism, productName, refLink, refSeqStatus, refSeqSummary, sex, source, tissue

Many of these were moved to hgFixed (https://genome.ucsc.edu/FAQ/FAQdownloads.html#download35)

To see all of the tables in the assembly that are related to genbank do this:

hgsql -Ne 'show tables' $db | egrep -f /cluster/data/genbank/etc/genbank.tbls

RR: Request push: rsync complete database

Announce you're gonna do a make public to Browser QA
Make sure you have done a "make public" for your db.
Request an rsync of the entire database from hgwbeta to mysqlrr/euro/asia.
Request drop of trackDb_public and hgFindSpec_public from mysqlrr/euro/asia
Request push of trackDb and friends
See an example push request

RR: Push complete for rsync database

RR: Double check tables on mysqlrr, euro, asia from rsync push

QA does not have write access to mysqlrr.
Tables are populated to mysqlrr first, then mirrored to public servers (genome-mysql and genome-euro-mysql)
QA can can set up read-only access to mysqrrr.

You can view the database contents on mysqlrr by creating a new .hg.conf file in your home dir using the read-only configuration. You can copy the needed config lines from the .hg.conf file on any of the RR machines in cgi-bin/hg.conf.private

Steps to create your own .hg.conf file which will allow you to query mysqlrr:

ssh qateam@hgw0
cat cgi-bin/hg.conf.private | grep -A6 "db.host is"
note the contents of the above grep results
exit

In your HOME directory on hgwdev, make up a file:

$HOME/.hg.mysqlrr.conf

then, add the following settings to the file, which you found in the above grep step:

db.host=mysqlrr
db.user=<userName>
db.password=<passWord>
db.trackDb=trackDb

next, change the permissions of your file:

chmod 600 .hg.mysqlrr.conf

Now you should be able to query mysqlrr with a query like this:

$ HGDB_CONF=$HOME/.hg.mysqlrr.conf hgsql -e 'show tables;' hg38Patch11
+-----------------------+
| Tables_in_hg38Patch11 |
+-----------------------+
| chromInfo             |
+-----------------------+

If you are ever in doubt about which SQL server you are working with:

$ HGDB_CONF=$HOME/.hg.mysqlrr.conf hgsql -e 'show variables;' hg38Patch11 | grep hostname
hostname        mysqlrr

Alternative (If inherited .hg.conf)

ssh qateam@hgw0

[qateam@hgw0 /home/qateam] HGDB_CONF=`pwd`/.hg.local.conf /home/qateam/bin/x86_64/hgsql -e 'show tables;' $db

How to access non-public sql-rr on genome-euro and genome-asia

genome-euro ssh qateam@genome-euro Last login: Thu Nov 9 21:11:50 2017 from hgwdev.gi.ucsc.edu [qateam@genome-euro /home/qateam]

hgsql -e "show databases like 'susScr%'";

hgsql -e "show tables" xenLae2;

genome-asia

From dev: ssh cath@genome-asia.ucsc.edu
Now you will be in [cath@genomebrowsermirror ~]$
Now, do this special step only for asia:

sudo /bin/su - qateam

Then you can query mysqlrr on genome-asia like this:

[qateam@asiaNode /home/qateam] hgsql -e 'show databases like "%atch%";'
+-------------------+
| Database (%atch%) |
+-------------------+
| hg19Patch10       |
| hg38Patch11       |
| mm10Patch4        |
+-------------------+

RR: Check for Ensembl tracks

Review the Ensembl QA wiki for special procedures related to Ensembl tracks.

RR: Check for correct row in hgFixed.trackVersion for Ensembl tracks

Make sure the database hgFixed has the correct line/version for Ensembl for your assembly.
Never push the entire trackVersion table:

Be careful not to push any lines that are not ready to go the rr, there may be a row staged with a newer version that hasn't been released yet.

Note: Documentation needed on how to push rows. It is possible that the engineer will do this in advance, QA should check and then ask the engineer if the needed row is not already on the beta and rr table.

Grab rows for each Ensembl track using

  hgsql -Ne "select * from trackVersion where db='oviAri4'" hgFixed > oviAri4.trackVersion

Insert rows into trackVersion table in hgFixed by the 'load infile' command from beta steps

Once a line has been added to the trackVersion table on hgFixed, a normal push request for the table can be made.

RR: Request push: chain nets for other assemblies

At the start of the RR steps, you asked for an rsync of your database from beta>rr/euro/asia, so you have already pushed the chain/nets within your database. Now we need to do this for any other databases (aka, other assemblies that your assembly has chain/net alignments to).

Email BrowserQA with a make public notification (with no text, only a subject), wait a few minutes, and then make public from trackDb.

  make public DBS="$db $db2 $db3"

Push trackDb & friends for any other databases
Push chain/chainLink/net tables for each database.
See this example push request .

To be kind to the pushers, send separate emails for each database!

RR: Push done for chain nets for other assemblies

RR: Request push: hgdownload files

Push hgdownload files to RR
These files are listed in your Redmine File List, but DO NOT include /gbdb/ files in this list.
Double-check the README & md5sum.txt file.

Data files destined for hgdownload are organized on hgwdev at:

/usr/local/apache/htdocs-hgdownload/goldenPath/*

These files can be viewed in a browser from http://hgdownload-test.cse.ucsc.edu/downloads.html.
Non-data files (such as downloads.html) are in the "hgdownload" git repository.
See an example push request.

RR: Push complete for downloads

RR: Push /gbdb files to the RR

Push the /gbdb files from hgwbeta to hgnfs1/euro/asia. Note that you CANNOT use * characters in these pushes. Expand them with ls before pushing

Example request

RR: Push complete for /gbdb files

RR: Add or update symlink htdocs:hgdownload currentGenomes

Your assembly should have a symlink in /usr/local/apache/htdocs-hgdownload/goldenPath/currentGenomes, you probably need to update or add the symlink on /usr/local/apache/htdocs-hgdownload/goldenPath/currentGenomes so that it points to the most recent assembly for your organism. If your assembly is a new version and does not have a multiple alignment, you can skip the symlink step.

NOTE that autocomplete adds a /, which will make your rm statement fail. If you tab complete, remove the / at the end of the statement, otherwise it'll fail silently and your pushers won't be happy.

 rm Name_of_symlink
 ln -s ../$db Name_of_symlink

e.g.,

/usr/local/apache/htdocs-hgdownload/goldenPath/currentGenomes
ln -s ../manPen1 Manis_pentadactyla

More about symlinks on stackoverflow

RR: Request push of symlink for currentGenomes

Request a push of the symlink from hgwdev to hgdownload.
This is for ftp users who only want to go to the most recent assembly for an organism.
After it is pushed, check that it is functioning correctly on the current genomes ftp page.

See example push request.

RR: Push complete for currentGenomes symlink

This step is only for an assembly that is the NOT the 1st for the organism. A $db1 does not need this step.

RR: check symlink on ftp site

ftp://hgdownload.soe.ucsc.edu

The path is /goldenPath/currentGenomes/$db

ftp://hgdownload.soe.ucsc.edu/goldenPath/currentGenomes/

RR: Request push: start dump:autodump

Database rsync should be complete before doing this.
Request start of dump/autodump for your assembly on rr/euro/asia.
This populates the "database" directory on hgdownload: http://hgdownload.soe.ucsc.edu/goldenPath/$db/database/

See this example push request.

Notes:

genome-mysql syncs with hgdownload every night, so when you requested the autodump, then genome-mysql will automatically sync that night (anything new). If the autodump was completed at least 1 day ago, your new assembly should be available on genome-mysql, and a push request is not needed. If you do not want to wait 1 day for the nightly sync, you can request that the admins "make the $db database available on genome-mysql."

In the past, we would also request, "Links and permissions should be made for user, "genome" and "genomep". (Jorge says to follow the instructions in the wiki page for "Mirror_Server".)" This information is no longer needed in the push request.

RR: Check that autodump is working

Check for .txt.gz and .sql files on hgdownload:/usr/local/apache/htdocs/goldenPath/$db/database

To get a link for the database directory, you can copy paste this into your terminal, and then copy paste that into your web browser.

echo http://hgdownload.soe.ucsc.edu/goldenPath/$db/database/

E.g., http://hgdownload.soe.ucsc.edu/goldenPath/manPen1/database/

RR: Check public genome-mysql

This is the public MySQL server - check that all tables are present. Tables/database will appear here nightly after they are on mysqlrr. For euro, updates are pushed out once per week, on the weekend.

Check for

your assembly
your 'other organism' assemblies for any chain/nets.

From hgwdev:

mysql -h genome-mysql -A -u genome $db
mysql -h genome-mysql-euro -A -u genome $db

RR: Review copyHgcentral steps

You can copy items from hgcentraltest to hgcentral with the copyHgcentral script. For the usage statement, run:

copyHgcentral -h

The copyHgcentral script must be run in test mode first.
Test mode will show you the state of hgcentraltest, hgcentralbeta and hgcentral.
Once test mode has been run and reviewed, run execute mode to copy from hgcentralbeta to hgcentral.
Note that test mode generates output files which must be manually deleted afterward. Be sure to run copyHgcentral in hive or your home directory and not in a directory where temp files should not be.
Note that copyHgcentral can be run for "all" (blatServers, dbDb, defaultDb, genomeClade):

copyHgcentral test $db all beta rr

RR: copyHgcentral test db blatServers beta rr

Generates files, run in hive:

copyHgcentral test $db blatServers beta rr

copyHgcentral execute $db blatServers beta rr

You can also check on mysql:

hgsql -h genome-centdb

use hgcentral;

select * from blatServers where db='manPen1';

or

hgsql -h genome-centdb -e "select * from blatServers where db='felCat9' " hgcentral

RR: copyHgcentral test db dbDb beta rr

Generates files, run in hive:

copyHgcentral test $db dbDb beta rr

copyHgcentral execute $db dbDb beta rr

You can also check on mysql:

hgsql -h genome-centdb

use hgcentral;

select * from dbDb where name='manPen1' \G;

RR: hgCentral:dbDb set active equal to 1

Note- This step should be completed after copying hgcentralbeta to hgcentral**

Go to hgcentral and see what the 'active' field is set to (0=not visible, 1 = visible for gateway assembly version drop-down.)

hgsql -h genome-centdb hgcentral
UPDATE dbDb SET active = 1 WHERE name = "$db";

Or without going into SQL, followed by a check that active=1

hgsql -h genome-centdb -e "update dbDb set active = 1 where name = '$db'" hgcentral
hgsql -h genome-centdb -e "select * from dbDb where name = '$db'" hgcentral

RR: copyHgcentral test db defaultDb beta rr

Generates files, run in hive:

copyHgcentral test $db defaultDb beta rr

copyHgcentral execute $db defaultDb beta rr

You can also check on mysql:

hgsql -h genome-centdb

use hgcentral;

select * from defaultDb where name="manPen1"limit 1;

RR: make your new assembly the default

NOTE:This step should be added to the start of the copyhgCentral part, and the update command should be done on central, then copied to beta, then to the rr the command then would be:

hgsql hgcentraltest
update defaultDb SET name="susScr11" where name="susScr3";

Ignore commands above, just a note for the future.

If your organism has multiple assemblies, you should make your newest assembly the 'default' assembly - it will appear by default in the drop-down list for assemblies for that organism in the gateway page. There may be reasons to leave the older assembly as the default, for example, if the newer assembly is scaffold-only and has no chroms, or if the older assembly has more tracks. If unsure, ask the engineer and/or management which assembly should be default.

For human and mouse, likely the previous assembly will remain default for some time, check with management.

hgsql -h genome-centdb -e "update defaultDb SET name='$db' where name = 'galGal4'" hgcentral
hgsql -h genome-centdb -e "select * from defaultDb where genome='Chicken';" hgcentral

RR: copyHgcentral test db genomeClade beta rr

NOTE: This table probably will not need to be updated. It contains records like this:

mysql> select * from genomeClade order by rand() limit 5;
+-----------------+------------+----------+
| genome          | clade      | priority |
+-----------------+------------+----------+
| GRCh38.p2       | haplotypes |      134 |
| C. japonica     | worm       |       70 |
| Atlantic cod    | vertebrate |      125 |
| D. melanogaster | insect     |       10 |
| D. persimilis   | insect     |       55 |
+-----------------+------------+----------+

Generates files, run in hive:

copyHgcentral test $db genomeClade beta rr

copyHgcentral execute $db genomeClade beta rr

RR: copyHgcentral: liftOverChain: manual move

liftOverChain is not copied with the copyHgcentral script, it needs to be copied manually.

Only copy lines from liftOverChain on hgcentralbeta to hgcentral if there are liftOver files listed in the pushQ and if the assemblies they go to/from exist on the RR.
Check for lines in liftOverChain that should be in the pushQ, but aren't (e.g., the liftOver from a previous assembly).
Add lines related to your assembly, any previous versions of your organism, and any other organisms that are associated with liftOver files and your assembly.
More details on the Chain and Net QA wiki page.

 hgsql -h hgwbeta -Ne "SELECT * FROM liftOverChain WHERE fromDb = '$db' OR toDb = '$db'" hgcentralbeta > chain.beta

Check public mysql, load if not present and recheck:

hgsql -h genome-centdb -Ne "SELECT * FROM liftOverChain WHERE fromDb = '$db' OR toDb = '$db'" hgcentral

Example: hgsql -h genome-centdb -Ne "SELECT * FROM liftOverChain WHERE fromDb = 'manPen1' OR toDb = 'manPen1'" hgcentral

hgsql -h genome-centdb -e "LOAD DATA LOCAL INFILE 'chain.beta' INTO TABLE liftOverChain" hgcentral

TIP: An easy way to add liftOver rows!

Run $ checkMetaData.csh $db hgwbeta RR
This creates files in the dir in which you run it.
Use the file "liftOverChain.$db.hgcentralbetaOnly" as your LOAD file:

hgsql -h genome-centdb -e "LOAD DATA LOCAL INFILE 'liftOverChain.susScr11.hgcentralbetaOnly' INTO TABLE liftOverChain" hgcentral

After loading, run checkMetaData.csh $db again to make sure there are no differences.

RR: checkMetaData

After completing copyHgcentral steps, run checkMetaData.csh $db hgwbeta rr

This checks that all of the metadata is the same on hgcentraltest, hgcentralbeta, and hgcentral.
Run this script in a temporary folder or hive; it creates some comparison files that can be deleted after the check.

Example output below.

The "table.$db.common" rows should not be zero (they have X rows in common that are the same).
The rows above "common" (hgcentralbetaOnly & hgcentralOnly) should be zero (they have zero differences between them). If they are not zero, it means that there are differences among the the row/s for that table, so you'll need to figure out what's different and sync them. One possibly problem is that you have just run, "copyHgcentral all" and dbDb active was set to 0, where the others are set to 1.

checkMetaData.csh $db hgwbeta rr

database = manPen1

  0 dbDb.manPen1.hgcentralbetaOnly
  0 dbDb.manPen1.hgcentralOnly
  1 dbDb.manPen1.common

  0 blatServers.manPen1.hgcentralbetaOnly
  0 blatServers.manPen1.hgcentralOnly
  2 blatServers.manPen1.common

  0 defaultDb.manPen1.hgcentralbetaOnly
  0 defaultDb.manPen1.hgcentralOnly
  1 defaultDb.manPen1.common

  0 genomeClade.manPen1.hgcentralbetaOnly
  0 genomeClade.manPen1.hgcentralOnly
  1 genomeClade.manPen1.common

  0 liftOverChain.manPen1.hgcentralbetaOnly
  0 liftOverChain.manPen1.hgcentralOnly
  4 liftOverChain.manPen1.common

RR: Request push of gateway image if not already there

Please push the following files from hgwbeta --> RR/euro/asia.

/usr/local/apache/htdocs/images/Manis_pentadactyla.jpg

RR: Push complete of gateway image

RR: Check all tracks

Check your tracks on the RR. Also check that all default tracks still display.

RR: Check search

Check that searches work (if not, you probably need to push the hgFindSpec_public table).

RR: Check Tools: LiftOver

Check LiftOver on rr.

RR: Check Tools: BLAT: dna

Copy some dna and check BLAT for a DNA search on rr.

RR: Check Tools: BLAT: protein

Copy some protein and check BLAT for a protein search on RR.

RR: Check Tools: isPCR

Check Tools > In Silico PCR on the RR. See how to test PCR details from DEV steps

RR: Check Table Browser

Check Table Browser functions, try exporting sequence, look at tables via TB, look at schemas.

RR: Check chain nets tracks for other assemblies

QA chain/nets for the other assemblies.

If this is an assembly update to an existing organism, you will need to remove the previous chain/net tables from mysqlrr/genome-euro/genome-asia, i.e.,

MySQL [mm10]> show tables like '%anTro5%';
+---------------------------+
| Tables_in_mm10 (%anTro5%) |
+---------------------------+
| chainPanTro5              |
| chainPanTro5Link          |
| netPanTro5                |
+---------------------------+

RR: QA everything on asia

RR: QA everything on euro

RR: Turn on GenBank updates add:commit:push

Once your assembly is listed in align.dbs see this section in BETA steps, turn on GenBank updates on the rr before 4:30 p.m.
Genbank updates run once a week on the rr, check for updated the Monday after starting genbank updates.
Add the new assembly to ~/kent/src/hg/makeDb/genbank/etc/rr.dbs in alphabetical order.
Be sure to save, git add, git commit, and git push the file.

RR: GenBank updates: make libs and run make

After committing the change, make sure your libs are up to date:

cd ~/kent/src ; make libs

then go ahead and run the make:

cd ~/kent/src/hg/makeDb/genbank/ 
git pull 
make install-server

RR: GenBank updates: check Genbank update times

Genbank updates run once a week on the RR.
To see whether updates have run (the Monday after the *.dbs file was updated), check the update times of the table 'gbLoaded'.

updateTimes.csh $db gbLoaded verbose

For example, you'll see updates for dev/beta/rr/euro/asia):

realTime.csh manPen1 gbLoaded verbose

gbLoaded
=============
dev  2017-04-29 11:48:19
beta 2017-04-29 11:48:19

rr   2017-04-20 11:26:10
euro 2017-04-20 20:26:10
asia (null) (null)

The update times will be out of sync between machines, but not by more than 24 hours or so if updates are running. The gbLoaded table will be updated regardless of whether changes to other GenBank tables were picked up. More genbank update instructions are available at Genbank updates.

The etc-update-server part of the make will cause the downloads mentioned below in the "Verify downloads" section to be created.

RR: Edit downloads:html and add:commit:push

git pull (since this is a different repo, be sure you have the latest version).
Add your assembly to downloads.html (~/hgdownload/downloads.html).
Remember to add any necessary links to other organisms/assemblies, such as "vs" files.
git add, commit, push.

ENCODE NOTE: If you are pushing ENCODE tracks, when using a second/third/fourth version of the data there is often a "releaseLatest" directory that has the latest files. Be sure that you are not pushing the entire releaseLatest directory, only the files from there.

RR: Push request for downloads:html

example push request

RR: Push request for downloads:html complete

RR: Check hgdownload files generated by Genbank process

Make sure that the files generated by Genbank that are mentioned in the bigZips/README file, (e.g. mrna.fa.gz) are present on hgdownload.

For example, Here is the README for manPen1 in the bigZips dir: http://hgdownload.soe.ucsc.edu/goldenPath/manPen1/bigZips/

And I can see the file xenoRefMrna.fa.gz.

RR: Edit newsarch:html and add:commit:git:push

Edit in your personal kent directory, make beta, check work, add, commit, push

You'll be editing:

~/htdocs/goldenPath/newsarch.html

And pushing:

/usr/local/apache/htdocs/goldenPath/newsarch.html

RR: Edit indexNews:html and add:commit:push

Edit in your personal kent directory, make beta, check work, add, commit, push

You'll be editing:

~/htdocs/indexNews.html

And push requesting:

/usr/local/apache/htdocs/indexNews.html

RR: Edit credits:html and add:commit:push

Edit in your personal kent directory, make beta, check work, add, commit, push

You'll be editing:

~/htdocs/goldenPath/credits.html

And push requesting:

/usr/local/apache/htdocs/goldenPath/credits.html

It's a good idea to add a link to the NCBI credits, because there is so much detail there. For example, on manPen1, there is a link to NCBI credits.

RR: FAQreleases.html and add, commit, git push

Edit in your personal kent directory, make beta, check work, add, commit, push

You'll be editing:

~/htdocs/FAQ/FAQreleases.html

You'll be push requesting:

/usr/local/apache/htdocs/FAQ/FAQreleases.html

https://genome.ucsc.edu/FAQ/FAQreleases.html

RR: Request push for static docs

When writing the announcement for the home (indexNews) page and the news (newsarch) page, please include the common name of the organism, in addition to the scientific name and assembly name. e.g. African clawed frog, xenLae2 (Xenopus laevis).

RR: Push complete for static docs and image and downloads

RR: Post Google Group, Facebook, and Twitter announcements

See announcement example. Be sure to get it proofread.

Also post a FB and Twitter update. See info here.

RR: Write release log text in Redmine and close

In Redmine

Write in the redmine release log field, see example on the release log
Mark the checkbox "Released to RR"
Change status to "Released."

Replace line break with comma: Reminder to add a missing close parenthesis. Example:

cat /hive/data/genomes/$db/pushQ/redmine.$db.releaseLog.txt | sed -n -e 'H;${x;s/\n/, /g;s/^,//;p;}'

RR: Next day: check release log

Check on Redmine Released to RR page
Check on the RR release log

Helpful wiki pages: redmine instead of the pushQ process for Tracks in redmine

Jonathan's program scans Redmine for 4 things:

Status = Released
Released to RR = checked
Release Log Text = populated (that's enough to get an entry in the new RL)
If the program also finds something in Release Log URL, it will turn the text into a link.

Notes: Be sure that the 'Release Log URL' starts with just two dots (../cgi-bin/ not ../../cgi-bin/) and that if you have multiple assemblies (hg19, hg38, mm10) for your data, then we should avoid a URL as it will populate the same link to all database sections

RR: Check track data in GBiB

Check your data tracks in the GBiB

GBiB pulls on data from hgdownload and the public MySQL server. Until the assembly is available in those places, it won't be visible in the GBiB.

🔵 Done with RR steps? You're done! Go grab yourself some coffee and a delicious donut, you deserve it!

Assembly QA Part 4 RR Steps

RR: Check that tables do not need to be pushed again

RR: Request push: rsync complete database

RR: Push complete for rsync database

RR: Double check tables on mysqlrr, euro, asia from rsync push

RR: Check for Ensembl tracks

RR: Check for correct row in hgFixed.trackVersion for Ensembl tracks

RR: Request push: chain nets for other assemblies

RR: Push done for chain nets for other assemblies

RR: Request push: hgdownload files

RR: Push complete for downloads

RR: Push /gbdb files to the RR

RR: Push complete for /gbdb files

RR: Add or update symlink htdocs:hgdownload currentGenomes

RR: Request push of symlink for currentGenomes

RR: Push complete for currentGenomes symlink

RR: check symlink on ftp site

RR: Request push: start dump:autodump

RR: Check that autodump is working

RR: Check public genome-mysql

RR: Review copyHgcentral steps

RR: copyHgcentral test db blatServers beta rr

RR: copyHgcentral test db dbDb beta rr

RR: hgCentral:dbDb set active equal to 1

RR: copyHgcentral test db defaultDb beta rr

RR: make your new assembly the default

RR: copyHgcentral test db genomeClade beta rr

RR: copyHgcentral: liftOverChain: manual move

RR: checkMetaData

RR: Request push of gateway image if not already there

RR: Push complete of gateway image

RR: Check all tracks

RR: Check search

RR: Check Tools: LiftOver

RR: Check Tools: BLAT: dna

RR: Check Tools: BLAT: protein

RR: Check Tools: isPCR

RR: Check Table Browser

RR: Check chain nets tracks for other assemblies

RR: QA everything on asia

RR: QA everything on euro

RR: Turn on GenBank updates add:commit:push

RR: GenBank updates: make libs and run make

RR: GenBank updates: check Genbank update times

RR: Edit downloads:html and add:commit:push

RR: Push request for downloads:html

RR: Push request for downloads:html complete

RR: Check hgdownload files generated by Genbank process

RR: Edit newsarch:html and add:commit:git:push

RR: Edit indexNews:html and add:commit:push

RR: Edit credits:html and add:commit:push

RR: FAQreleases.html and add, commit, git push

RR: Request push for static docs

RR: Push complete for static docs and image and downloads

RR: Post Google Group, Facebook, and Twitter announcements

RR: Write release log text in Redmine and close

RR: Next day: check release log

RR: Check track data in GBiB

Navigation menu

Search