Adding New Tracks to a browser installation

From genomewiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

NOTE: This page is not necessarily maintained with the most up-to-date information. The information in the README files in the source tree is guaranteed to be current: src/product

See Also

For a generic discussion of how to load any type of track into your local browser mirror, refer to the document in the source tree src/product/README.trackDb and the discussion of how the trackDb entries function in src/hg/makeDb/trackDb/README See also How_to_add_a_track_to_a_mirror.

Gotchas

Your .bed file better not have any browser or track lines if you want the loader to work (e.g.:

grep '^chr' yourFile.bed | hgLoadBed hg18 myData stdin

You need to hop all over the source tree like a frog on a griddle to get things done... (it may be convenient to declare aliases for frequent destinations:

alias tdb='cd ~/kent/src/hg/makeDb/trackDb'
alias mdb='cd ~/kent/src/hg/makeDb/doc'

The docs are a little misleading perhaps. I seemed to need a .hg.conf file in my home directory - setting env options didn't seem to help a bit for commandline building access. (see also: src/product/README.mysql.setup)

Sometimes (there is documentation in the files listed above for this) you will need to hash the first line of make alpha for it to work. This is only applicable for the older versions of mirrors. (see also: src/product/README.trackDb)



Instructions for the older mirrors

From the readme on addTrack.txt
(warning: this text is from 2003. It is good for general concepts. For current instructions, use the README files in the source tree src/product/README.*)

I. Introduction.

This describes how to add a track to the UCSC genome browser. The two major steps in adding a track are creating a table containing the track information, and putting a description of the track in trackDd. The browser has one mysql database for each version of each genome that it displays. Both the track table and the track description live in this database. The current human genome database is hg13, while the current mouse database is mm2.


II. MySQL Preliminaries. (see also: src/product/README.mysql.setup)

Before you get started it is good to look at these databases a little, and make sure that you have update access to them. You could do this directly with the 'mysql' command, but let's do it instead with the 'hgsql' command, which will keep you from having to type your user name and password all the time.

Assuming you've got the browser source already installed in ~/kent/src do the following to create hgsql cd ~/kent/src/lib make This make almost always goes smoothly on Linux. You may need to remove the '-ggdb' flag in the makefile on other systems, and possibly set up a MACHTYPE environment variable, and then mkdir $MACHTYPE on some systems. Next cd ../hg/lib make The main problem that can happen with this make is if the mysql libraries and include files are not found. See kent/src/README for details. The next step is cd ../hgsql make rehash The hgsql program is just a thin wrapper around mysql. It looks for the password and username in the file ~/.hg.conf. Here's the necessary parts of .hg.conf:

  1. db.host is the name of the MySQL host to connect to

db.host=localhost

  1. db.user is the username is use when connecting to the host

db.user=mysqlUserName

  1. this is the password to use with the above hostname

db.password=mysqlPassword

  1. this is a database where stuff common to all versions of the genome is stored

central.db=hgcentral

This .hg.conf is similar to the cgi-bin/hg.conf file that the browser uses, but it need not contain everything that file does. Also it's advisable to have a read-only user/password in cgi-bin/hg.conf while you'll want a read-write user/password in ~/.hg.conf. Setting this up can involve doing some 'grants' in mysql. See the documentation at www.mysql.com for how do set up various users.

Assuming your mysql and .hg.conf are set up, and that you already have a mirror site going then the command hgsql database (where database is something like hg13 or mm2) should bring you to the mysql prompt. Do mysql> show tables; and you should see a large list of tables. When you've finished adding a track, the track(s) for your tables will be among them. Also try doing: mysql> describe trackDb; This will list the fields of the trackDb table, which has a row for each track. Then do mysql> select tableName,shortLabel,type from trackDb; This will show you some of the key fields from this table. You won't be updating this table directly, but it can be handy to look at it sometimes for debugging purposes. Some other useful mysql commands are

       mysql> select count(*) from sex;

This will count up all the items in the sex table. You thought there were only two? This table reflects the diversity of the sex fields in genbank. Try mysql> select * from sex; to see the full diversity. Well, enough of that non-normalized nightmare. To get out do:

       mysql> quit


III. Loading the main track table.

The UCSC Genome Browser Database is usually loaded from a text file of some sort. The most popular types of text files are .psl files for blat alignments, .bed files for a wide variety of data, and GTF files for gene predictions. See http://genome.ucsc.edu/goldenPath/help/customTrack.html for further information on these formats. For now we'll assume you have a file in one of these formats that you want to add to the browser.
(see also: src/hg/makeDb/trackDb/README and src/product/README.building.source)

A) Creating the loader programs cd ~/kent/src/hg/makeDb cd hgLoadPsl make cd ../hgLoadBed make cd ../ldHgGene make cd ../hgPepPred

  The makeDb directory also contains loaders for a number of more
  specialized tables including hgLoadOut for RepeatMasker data.  There
  is also a .doc file describing in detail how we created each database
  in the files named things like makeHg13.txt and makeMm2.txt. (in src/hg/makeDb/doc/*.txt)

B) Loading a bed file

  Loading a bed file is the most straightforward.  First decide on
  the name you want to call the table.  Then do
      hgLoadBed database tableName file.bed
  type hgLoadBed with no arguments for further information. 
  Database will be something like hg13 or mm2.

C) Loading a psl file

  Loading a psl file is also easy.  Make sure that the psl file
  is sorted by chromosome (tName) and start position (tStart).  Use
  kent/src/hg/pslSort or just plain Unix sort for this if necessary.
  If the number of alignments is somewhat modest (say less than 
  500,000) then do
  	hgLoadPsl database -table=tableName file.psl -tNameIx
  This will load everything into one big table.  For huge numbers of
  alignments the browser will be faster if you first split up the
  data into one file for each chromosome.  Name these files 
  chr1_tableName.psl  chr2_tableName.psl and so forth.  Then do
       hgLoadPsl database chr*_tableName.psl
  This will end up making a separate table for each chromosome.
  Unfortunately it is still a bit complicated to make the details
  pages for a psl format track to include the alignments themselves.
  Please contact us at UCSC if this is a priority for you and we
  will try to make it easier.

D) Loading a GTF (or GFF) file

  Generally GTF is a much more tightly defined standard than GFF, so
  GTF files are more likely to work without tweaking.  However most
  reasonable GFFs will work as well.  To load do
       ldHgGene database tableName file(s).gtf
  This will make a gene-prediction type table. You often will want
  to create an associated predicted peptide table as well. To do this
  do
       hgPepPred database generic tableNamePep file(s).fa
  The first word after the '>' in the fasta files should use the same
  symbol as the 'group' in GFF files or 'transcript_id' in GTF files.

IV. Updating trackDb

WARNING: these trackDb instructions are OBSOLETE, please follow the instructions in src/product/README.trackDb

Your data will not display in the browser until you load it into trackDb. To do this first cd ~/kent/src/hg/makeDb/trackDb and look at the file trackDb.ra, and read the README file. Then decide whether your new track should be global, organism specific, or assembly specific, and edit the corresponding trackDb.ra file. Generally it's good to find an existing track as similar as possible to the track you want to add, copy and paste it, and modify the copy. Then put any explanitory text you want on the track in trackName.html in the appropriate directory. After this do a make alpha to update the trackDb table, or a

       make

to update trackDb_user (where user is you Unix username). If multiple engineers are working on the project you can set up cgi-bin-user directories with hg.conf files that will tell the browser to use trackDb_user instead of trackDb to avoid conflicts with other engineers code.

After the 'make alpha' the browser should show your track. Congratulations if you've made it this far.

-Jim Kent Feb 14, 2003.

Instructions to upload wiggle files

These following instructions are for wiggle bed files. For the other wiggle formats, please alter accordingly. When uploading wiggle files, like the bed files, the header must be taken off, and the type must be set as wig 0 100. Groups should be in separate files to be seen as separate tracks. There are other ways of displaying wig files, but this is the best currently. The format of the files should be :- chr bpstart bpstop score \n


chr17 30258 30259 1


It doesn't matter what order the chr are in, but it MUST be sorted bp value ascending. It is possible to alter the view to dot points, colour ect by changing my_tracks. These changes can be viewed in the help of UCSC genome browser. Then use the wigEncode function and hgLoadWiggle. The pathPrefix is used as it tries to write to the readonly section of the mirror which depending on how your mirror is set up, can cause issues. This redirects it to the directory you're working out of, where the wigEncode naturally pastes the .wig and .wib files. hg18 is the build.


wigEncode file label.wig label.wib


hgLoadWiggle -pathPrefix=/home/c.wells/ucsc/file hg18 label label.wig

A BED track description for a custom SNP track

The .bed file has lines like this:

chr22   49512530        49512531        rs8137951       0       +       49512530        49512531        255,0,0
chr22   49518559        49518560        rs756638        0       +       49518559        49518560        255,0,0
chr22   49522492        49522493        rs3810648       0       +       49522492        49522493        255,0,0
chr22   49524956        49524957        rs2285395       0       +       49524956        49524957        255,0,0
chrX    100017093       100017094       rs5921682       0       +       100017093       100017094       255,0,0
chrX    100019802       100019803       rs5967204       0       -       100019802       100019803       255,0,0

Load the .bed file into a custom track called Ill550v3 Note the .bed file must have NO browser or track lines - otherwise hgLoadBed will barf

/var/www/cgi-bin/loader/hgLoadBed -noBin  -tab hg18 Ill550v3 /home/rerla/public_html/illHH550v3.BED

Adjust your trackDb.ra file

I'm working (eg) on meme in

/home/rerla/hg18/kent/src/hg/makeDb/trackDb/human/hg18

I add these settings - they seem to work the way I want, allowing the name field from the .bed file to appear in full view:


track Ill550v3
priority 20.1   
shortLabel Illum550kv3           
longLabel Illumina 550k v3 snps
visibility pack
type bed 9 .          
color 255,0,0   
group varRep                 
thickDrawItem on

Recompile the trackDb

make alpha DBS=hg18