CGI Build Process: Difference between revisions

From genomewiki
Jump to navigationJump to search
Line 103: Line 103:


* re-source buildEnv.csh
* re-source buildEnv.csh
  hgwbeta> source buildEnv.csh
  hgwbeta> source buildEnv.csh     # or just restart your shell windows


* check that the vars are correct
* check that the vars are correct
Line 114: Line 114:
  hgwbeta> @ NEXTNN = ( $BRANCHNN + 1 ) ; git commit -m "v$NEXTNN preview" buildEnv.csh; git push
  hgwbeta> @ NEXTNN = ( $BRANCHNN + 1 ) ; git commit -m "v$NEXTNN preview" buildEnv.csh; git push


* use screen to run
screen
* run doNewReview.csh as a test to see what it will do (review the variablies)
* run doNewReview.csh as a test to see what it will do (review the variablies)
  hgwbeta> ./doNewReview.csh
  hgwbeta> ./doNewReview.csh
 
* run for real (this takes about 2 minutes - it runs git reports by ssh'ing to hgwdev) and direct output to a log file
* run for real (this takes about 20 minutes - it does the run by ssh'ing to hgwdev) and direct output to a log file
  hgwbeta> ./doNewReview.csh real >& doNewRev.log  
  hgwbeta> ./doNewReview.csh real >& doNewRev.log &
  ctrl-a, d  to detach
  hgwbeta> tail -f doNewRev.log
  hgwbeta> tail -f doNewRev.log



Revision as of 01:49, 20 July 2010

This page explains the process we use for building and releasing our CGIs. This is done on a two-week schedule.

The builds are built into sandboxes which are located here:

hgwbeta:/data/releaseBuild
titan:/scratch/releaseBuild

Older hgwbeta builds are periodically relocated here to save space on hgwbeta which has a small SSD disk:

 /hive/groups/browser/build

Setting Up the Environment for the Build

NOTE: This section is a one-time only set up that you must do before starting to do the builds.

Before starting as buildmeister, you will need to set up the following in your log in file:

  • go to your home directory
hgwdev> cd
  • edit your .tcshrc file
hgwdev> vi .tcshrc file
  • add the following lines to set permissions on files and to set the environment variables ($BOX32, $WEEKLYBLD, $BUILDDIR and $BRANCHNN are set in one of the build scripts - buildEnv.csh):
umask 002
source /cluster/bin/build/scripts/buildEnv.csh
  • To be able to run the Java robot programs, add the following to the top of your path setting:
set path = ( /usr/java/default/bin \
  $path \
     .
     .
     .
  )
  • optional helper functions:
alias wb 'cd $WEEKLYBLD'
if (( "$HOST" == "$BOX32" ) || ( "$HOST" == "hgwbeta" )) then
    setenv hg $BUILDDIR/v${BRANCHNN}_branch/kent/src/hg
endif
wb gets you to the scripts dir.
cd $hg gets you to the sandbox
on beta when you have to recompile stuff
after branch tag moves, etc.
  • source your .tcshrc to check the variables:
hgwdev> tcsh
  • Set up autologin among the general cluster machines

On your local cse box (i.e. screech, pfft, whatever) >ssh-keygen -t dsa (use enter for all defaults) >cd ~/.ssh, add yourself to the authorized keys >cp id_dsa.pub authorized_keys

Also put these in hgwdev:~/.ssh >scp -r .ssh/ hgwdev:

Permissions on .ssh should be 700.

Permissions on files in .ssh/ should be 600 or 640.


  • Set up autologin to hgdownload by copying your public key to the list of authorized keys on those machines:
hgwdev> vi ~/.ssh/id_dsa.pub
copy the public key into the clipboard and then log into hgdownload as user qateam
hgwdev> ssh qateam@hgdownload
hgdownload> cd ~/.ssh
paste the key to the authorized_keys file
hgdownload> vi authorized_keys

Build Symlinks

These are critical for building 32 bit and 64 bit utilities

  • Go to ~/bin directory
hgwdev> cd ~/bin
  • Make sure you have $MACHTYPE directories
hgwdev> mkdir i386
hgwdev> mkdir x86_64
  • Create a symlink for each $MACHTYPE
hgwdev> ln -s /cluster/bin/i386 i386.cluster
hgwdev> ln -s /cluster/bin/x86_64 x86_64.cluster
  • The symtrick.csh uses these automatically.
  • If a script crashes and leaves the symlinks in an incorrect state, use unsymtrick.csh to restore. Build scripts check to see if unsymtrick.csh should be executed.

Preview Day Build : Day 2

This is day 2 in the schedule.

Run Git Reports

  • go to /cluster/bin/build/scripts/
hgwbeta> cd $WEEKLYBLD

  • edit buildEnv.csh: change the 5th line then the 4th line
hgwbeta> vi buildEnv.csh
 line 5 (OLD): setenv LASTREVIEWDAY 2006-03-20 # preview of v110
 line 5 (NEW): // change it to look like the date and comment from line 4
 line 4 (OLD): setenv REVIEWDAY 2006-04-03  # preview of v111
 line 4 (NEW): setenv REVIEWDAY 2006-today  # preview of v112
  • re-source buildEnv.csh
hgwbeta> source buildEnv.csh     # or just restart your shell windows
  • check that the vars are correct
hgwbeta> env
  • make sure you are on master branch
git checkout master
  • commit the changes to this file to Git:
hgwbeta> @ NEXTNN = ( $BRANCHNN + 1 ) ; git commit -m "v$NEXTNN preview" buildEnv.csh; git push
  • use screen to run
screen
  • run doNewReview.csh as a test to see what it will do (review the variablies)
hgwbeta> ./doNewReview.csh
  • run for real (this takes about 2 minutes - it runs git reports by ssh'ing to hgwdev) and direct output to a log file
hgwbeta> ./doNewReview.csh real >& doNewRev.log 
  ctrl-a, d  to detach
hgwbeta> tail -f doNewRev.log

Check the reports

  • The reports are automatically built by the script into this location.
  • Briefly review the reports quickly as a sanity check.

===Generate summary and review pairings=== (Ann takes care of this)

  • Summarize the code changes that were committed during the past week.
  • Update this page with the summary.
  • Assign code-review partners.
  • Send an email to browser-staff with the summary and code-review pairings.

Test on hgwbeta

Make changes to code base as necessary

This happens on days 9, 10, and 11 in the schedule.

  • If there are problems with the build a developer will fix the code. This fix needs to be patched into the build on hgwbeta. This page explains how to move a Branch Tag and how to Patch a Branch on hgwbeta.

Final Build : Day 9

This is day 9 in the schedule.

Do the Build

  • go to weekly build dir on beta
hgwbeta> cd $WEEKLYBLD
  • edit the buildEnv.csh file
hgwbeta> vi buildEnv.csh
setenv BRANCHNN 131
setenv TODAY 2006-04-10     # v131 final
setenv LASTWEEK 2006-03-27  # v130 final
  • edit file: add one to the BRANCHNN
setenv BRANCHNN 132
  • edit file: change the 3rd line then the 2nd line
line 3 (OLD): setenv LASTWEEK 2006-03-27  # v130 final
line 3 (NEW): // change it to look like the date and comment from line 2
line 2 (OLD): setenv TODAY 2006-04-10     # v131 final
line 2 (NEW): setenv TODAY (today)        # v132 final
  • re-source buildEnv.csh
hgwbeta> source buildEnv.csh  # probably better to just close and restart your shell windows
  • check that the vars are correct
hgwbeta> env
  • check that you are on master branch
git checkout master
  • commit the changes to this file to Git:
hgwbeta> git commit -m "v$BRANCHNN final build" buildEnv.csh;git pull;git push
  • run doNewBranch.csh
hgwbeta> screen
  • test to see what it will do (review the variables)
hgwbeta> ./doNewBranch.csh
  • run for real, send the output to a file and review while it is written (takes ~1 hour)
hgwbeta> ./doNewBranch.csh real >& doNew.log
ctrl-a, d  # to detach from the screen
hgwbeta> tail -f doNew.log
  • look for files that tell you it was successful (script will report whether these files were created):
hgwbeta> /cluster/bin/build/scripts/32bitUtils.ok  
hgwbeta> /cluster/bin/build/scripts/GitReports.ok
  • If you get errors it might be because the script is wrong, rather than there actually be an error. For example, to check for errors, the 'make' log file is grepped for 'error|warn' so any new 'C' file with error or warn in its name will show up as an error whether or not it compiled cleanly. You might need to change the script to remove references to files like this, eg edit buildBeta.csh to ignore references to files like gbWarn.c and gbWarn.o in the log:
hgwbeta> vi buildBeta.csh
...
make alpha >& make.alpha.log
# These flags and programs will trip the error detection
sed -i -e "s/-DJK_WARN//g" make.alpha.log
sed -i -e "s/-Werror//g" make.alpha.log
#-- report any compiler warnings, fix any errors (shouldn't be any)
#-- to check for errors:
set res = `/bin/egrep -i "error|warn" make.alpha.log | /bin/grep -v "gbWarn.o -c gbWarn.c" | /bin/grep -v "gbExtFile.o gbWarn.o gbMiscDiff.o"`
  • What the doNewBranch.csh script does:
  1. edits the versionInfo.h file
  2. makes tags (takes 1 minute)
  3. builds Git reports (takes 1 minute)
  4. does build (takes 5-10 minutes)
    1. builds utils (of secondary importance)
    2. builds CGIs (most important)

Check the reports

  • The reports are automatically built by the script into this location.
  • Briefly review the reports quickly as a sanity check.

Run the Robots

  • [build-meister] run doRobots.csh, and watch the log if you are interested (most log messages go to the logs/ dir mentioned below)
hgwbeta> screen     # startup a new screen 
hgwbeta> ./doRobots.csh >& $BRANCHNN.robots.log 
  # ctrl-a, d to detach from screen
hgwbeta> tail -f $BRANCHNN.robots.log
  • What the doRobots.csh script does:
  1. runs robots one at a time
    1. hgNear (20 min)
    2. hgTables (several hours)
    3. TrackCheck (several hours)
    4. LiftOverTest (quick)
  • [build shepherd] Review the error logs for the robots:

error logs located here: hgwbeta:/cluster/bin/build/scripts/logs

  • hgNear -- sends email with results
  • hgTables -- send email with results
  • TrackCheck -- must check by hand: grep -i "error" logs/TrackCheck-v$BRANCHNN.log (TrackCheck person does this)
  • LiftOverTest -- must check by hand: cat logs/LiftOverTest-v$BRANCHNN.log

Fixing problems in the Build

This usually happens between days 9 and 12.

QA advises buildmeister to patch or move the branch tags

Push the CGIs

This is day 16 in the schedule.

Push to hgwN only

  • hgwN is one of the RR machines, hgw1-8. Each build, rotate to the next machine in numeric order i.e. hgw1 then hgw2 etc. so that one machine is not being worked more than the others.
  • QA will send an email to push-request the morning of the push letting the pushers know that today is a CGI push day (this is their notice to be vigilant about pushing quickly).
  • QA will ask for push of CGIs from hgwbeta to hgwN only. Make sure you add a note to the cluster-admins to make sure they know which RR machine to push to first. If there is a NEW CGI going out this week, be sure to make a prominent note of it in your push request. The admins push from a script, and they will need to add your new CGI to the script. (the build-meister should not be cc'd on this email.)

As of March 2009, here's a list of the CGIs and data files we push. Note: CGIs and data files may have been added since this list was created -- this is meant to be a starting point.

cartDump cartReset das hgc hgEncodeVocab
hgBlat hgConvert hgCustom hgGateway hgGene hgGenome
hgLiftOver hgNear hgPcr hgSession hgTables hgTracks hgTrackUi
hgVisiGene mkEncodeFrameset hgEncodeDataVersions
pbGateway pbGlobal pbTracks phyloGif hgPal hgSuggest

/usr/local/apache/cgi-bin/all.joiner
/usr/local/apache/cgi-bin/galaAvail.tab
/usr/local/apache/cgi-bin/hgNearData/*
/usr/local/apache/cgi-bin/hgGeneData/*
/usr/local/apache/cgi-bin/hgcData/*
/usr/local/apache/cgi-bin/hgCgiData/*
/usr/local/apache/cgi-bin/visiGeneData/*
/usr/local/apache/cgi-bin/loader/*
/usr/local/apache/cgi-bin/encode/cv.ra
/usr/local/apache/cgi-bin/lsSnpPdbChimera.py

For this directory we request an rsync --delete

/usr/local/apache/htdocs/js/*  (on the RR)
/usr/local/apache/htdocs/js/public/*  (on hgwbeta)
  • Run TrackCheck.java on hgwN. This is the responsibility of the QA person who tests hgTracks.
  1. start here: [hgwdev:/scratch/javaBuild/src/edu/ucsc/genome/qa/cgiCheck>
  2. make a props file which specifies the machine/db to check. If you are in a hurry, set zoomCount=0 and it will only check the default position for each assembly (much quicker!). Example props file for hgw4:
machine mysqlbeta.cse.ucsc.edu
server hgw4.cse.ucsc.edu
quick false
dbSpec all
table all
zoomCount 3
  1. run it: [hgwdev:/scratch/javaBuild/src/edu/ucsc/genome/qa/cgiCheck> nohup TrackCheck hgw1.props > & $WEEKLYBLD/logs/TrackCheck-hgw1.07-13-2006
  2. grep the output for 'error' (and 'Error').
  • Monitor Apache Error Log (QA does this):
hgwN:/usr/local/apache/logs/error_log

To watch the log without line wraps, use less -S. Use "F" to follow incoming errors.

  • Wait to hear from QA about how their CGIs look on hgwN. Each member of the QA team has testing responsiblities. Check also that TrackCheck ran successfully.

Push to the rest of the RR and hgwbeta-public

  • QA will ask for push from hgwbeta to the rest of the hgwN machines, as well as hgwbeta-public (note that the js directory files should go to /usr/local/apache/htdocs/js-public/* on hgwbeta in order to keep the javascript the same on the RR and hgwbeta-public)
  • QA will send email to the build-meister to let him/her know that the CGIs are on the RR.

Remember to keep track of new features

Anyone can add to this list at any time, but if no notes for this release have been made on the new features page, now is a good time to add some.

Final Build Wrap-up

This is day 16 in the schedule.

The buildmeister should do these steps once QA has notified you that all RR machines have been updated.

  • build and push hgcentral IF there are any changes
hgwbeta> ssh hgwdev
hgwdev> tcsh
hgwdev> cd $WEEKLYBLD
hgwdev> ./buildHgCentralSql.csh
hgwdev> ./buildHgCentralSql.csh real
  • build 'userApps' target (various utilities) on hgwbeta and scp them to hgdownload
hgwbeta> cd $WEEKLYBLD
hgwbeta> ./doHgDownloadUtils.csh
patch as needed
  • check that the utils version is right:
http://hgdownload.cse.ucsc.edu/admin/exe
  • build 32bit build and push to hgdownload
hgwdev> ssh hgwbeta
hgwbeta> tcsh
hgwbeta> cd $WEEKLYBLD
hgwbeta> ./doBuildCgi32.csh
patch as needed
  • check that the source file version is right:
ssh qateam@hgdownload "ls -ltr /mirrordata/apache/cgi-bin-i386"
  • update the beta tag to match the release:
hgwbeta> tcsh
hgwbeta> cd $WEEKLYBLD
hgwbeta> env          (just to make sure it looks right)
hgwbeta> ./tagBeta.csh
hgwbeta> ./tagBeta.csh real
  • tag the official release
ssh hgwbeta
cd $WEEKLYBLD
git fetch
git tag | grep "v${BRANCHNN}_branch"
Note: use .1 or .2 or whatever is the next unused subversion number
git push origin origin/v${BRANCHNN}_branch:refs/tags/v${BRANCHNN}_branch.1
git fetch
  • zip the source code
hgwbeta> tcsh
hgwbeta> cd $WEEKLYBLD
hgwbeta> ./doZip.csh  (this is automatically pushed to hgdownload)
  • check that the source file version is right:
http://hgdownload.cse.ucsc.edu/admin/
  • send email to genome-mirror@soe.ucsc.edu.

Include this link to latest source: http://hgdownload.cse.ucsc.edu/admin/jksrc.zip. Use the last email as a template (see https://www.soe.ucsc.edu/pipermail/genome-mirror). If you push the hgcentral.sql, make sure to mention this has also changed in the email.