Chains and Nets QA: Difference between revisions

From Genecats
Jump to navigationJump to search
m (→‎Update and push downloads.html: updating the numbering)
Line 121: Line 121:
====Update and push downloads.html====
====Update and push downloads.html====


7) To make a link to these new download files change the downloads.html file in your [[Static_Page_Protocol#Files_Destined_for_hgdownload | hgdownload source tree]].
8) To make a link to these new download files change the downloads.html file in your [[Static_Page_Protocol#Files_Destined_for_hgdownload | hgdownload source tree]].


* hgwdev (normally in /cluster/home/yourname/hgdownload):vi downloads.html
* hgwdev (normally in /cluster/home/yourname/hgdownload):vi downloads.html
Line 134: Line 134:




8) Your changes should now appear in /usr/local/apache/htdocs-hgdownload/downloads.html  
9) Your changes should now appear in /usr/local/apache/htdocs-hgdownload/downloads.html  


8) Email a push request to copy this file: /usr/local/apache/htdocs-hgdownload/downloads.html from hgwdev to hgdownload, with a note to replace "htdocs-hgdownload" with "htdocs" in the directory path. Once push is complete, check to see that your changes are now on the public downloads page.
10) Email a push request to copy this file: /usr/local/apache/htdocs-hgdownload/downloads.html from hgwdev to hgdownload, with a note to replace "htdocs-hgdownload" with "htdocs" in the directory path. Once push is complete, check to see that your changes are now on the public downloads page.




The end!
The end!

Revision as of 23:54, 25 April 2011


There are two components of chains/nets Chains_Nets: the actual chains/nets themselves and the liftOver directories/files. The liftOver [1] files make it possible to convert coordinates from one assembly to another. The liftOver files also have several associated files that will need to be pushed to hgdownloads at the end of the QA process. Chains and Nets are typically QAed in reciprocal pairs as similar tests are being done for both database-chain/net sets; however, this wiki only documents QAing one track.

Prior to QAing on hgwbeta: Pushing from hgwdev

1) Use sudo mypush to push chain/net tables from hgwdev to hgwbeta if this isn't part of a new assembly (the files have most likely been pushed). This will include 3 tables: a chain, net and chain link table. Syntax for this command is: sudo mypush [from database] [tableName] mysqlbeta. See the example below:

  • hgwdev: sudo mypush danRer6 chainMm9 mysqlbeta
  • hgwdev: sudo mypush danRer6 netMm9 mysqlbeta
  • hgwdev: sudo mypush danRer6 chainMm9Link mysqlbeta

2) "Make beta" on beta so that trackDb is updated to include the tables just pushed. Syntax for this command is: make strict DBS=[from database].

  • ex: hgwbeta: make beta DBS=danRer6

3) Email a push request to copy /gbdb/[from database]/liftOver/[from database]To[to database].over.chain.gz from hgwdev to hgnfs1. Note that the liftover file will now be available on both beta and RR as it is on hgnfs1. However, because the hgcentral database on the RR doesn't have an entry pointing to this file, it will only be visible on beta. Check to see if the push is needed first by clicking on the convert navigation link and checking if the other assembly is in the drop down.

  • ex: email: Please push /gbdb/danRer6/liftOver/danRer6ToMm9.over.chain.gz from hgwdev to hgnfs1.
  • note that the to database is capitalized as shown above in bold.

4) Add a line from hgcentraltest database to hgcentral beta so that file pushed in step 3 is visible on beta (this is similar to the same way that tables are not visible until trackDb is updated). To do this you first find the line on hgcentraltest.liftOverChain, copy it and then insert it into hgcentralbeta.liftOverChain. Note that it is very easy to make a mistake that can bring down hgcentral so make sure that your syntax and mysql statements are correct. See the example below:

  • hgwdev: hgsql hgcentraltest
mysql> select * from liftOverChain where fromDb=“danRer6” and toDb=“mm9”;
  • (copy the output into a text editor for later use)
  • (go to hgwbeta)
ssh hgwbeta
hgwbeta: hgsql hgcentralbeta
  • Repeat the previous mysql statement to make sure that this line isn't already on hgcentralbeta (duplicate lines are hard to remove):
mysql> select * from liftOverChain where fromDb=“danRer6” and toDb=“mm9”;
  • (put the values copied from hgcentral test into this statement. please note that the formatting must be followed exactly or output it to a file to be loaded in the next step)
mysql (on hgwbeta)> insert into liftOverChain values ("danRer6","mm9","/gbdb/danRer6/liftOver/danRer6ToMm9.over.chain.gz","0.1","0","0","Y","1","N");
or hgwbeta> hgsql -e "load data local infile 'fileName' into table liftOverChain" hgcentralbeta
  • (checking your work)
mysql> select * from liftOverChain where fromDb=“danRer6” and toDb=“mm9”;

QAing on hgwbeta

Quick QA

You can run the following two scripts instead of doing the "Full QA" (below) using the chainNetTrio script. Pick one (Quick or Full) and then move on to Test CGIs.

Run getChainLines.csh
getChainLines.csh [database] [other database]

Check that the values for chainMinScore and chainLinearGap output by the script match the values listed in the track description page, under "Methods, Chain track", for the relevant track in the Genome Browser.

Example:

Script output:

chainMinScore 3000
chainLinearGap medium

Track description text:

Chains scoring below a minimum score of '3000' were discarded; the remaining chains are displayed in this track. 
The linear gap matrix used with axtChain:
-linearGap=medium
Run getMatrixLines.csh
getMatrixLines.csh [database] [other database]

Check that the values for the matrix output by the script match the values shown in the track description page, under "Methods, Chain track", for the relevant track in the Genome Browser.

Example:

Script output:

matrixHeader A, C, G, T
matrix 16 91,-114,-31,-123,-114,100,-125,-31,-31,-125,100,-114,-123,-31,-114,91

Track description text:

  	A	C	G	T
A	91	-114	-31	-123
C	-114	100	-125	-31
G	-31	-125	100	-114
T	-123	-31	-114	91

Full QA

Use the following only if you do not do the Quick QA (above). You do not need to do both, as the Full QA steps (i.e. the chainNetRio.csh script) include the above Quick QA scripts.

Run the chainNetRio.csh script. The chainNetTrio.csh script runs several other scripts and outputs the results into several files. It is recommended that you create a separate directory to run this script in so you don't end up with the random output files in another directory. Read through the results in these three output files: *.chain.* , *.chain2.* , *.net.*. Mainly check that all the scripts tested ok and do a few manual checks that requested in these files.

To run the script:

chainNetTrio.csh  [database] [other database]
  • ex: chainNetTrio.csh danRer6 mm9

Test CGIs

There are two CGIs that use the liftOver data: hgConvert [2] and hgLiftOver [3]. To test these CGIs first select a top level short net that has very few other chains that match to the same area. To test hgConvert, first go to the genome browser of your "fromDb" database and center the window on the pre-selected net. Click on "Convert" link in the top blue bar. Configure the pull down menu to point to the "toDb" being tested and click "submit". The results should be the same as chain/net track details for that chain.

To test hgLiftOver first click on the "Utilities" link in the side blue bar on the home page and then click the first link to "Batch Conversion". Configure the pull down menus to match the toDB and fromDb being tested, enter the pre-selected test coordinates and click "submit". If the search fails, lower the minMatch (as low as 0.01) until some result for some region is obtained successfully. Check to see if the results match those from hgConvert and the chain/net track. Results in hgConvert may not match hgLiftOver but will still match the net and chains exactly. If results in hgLiftOver are NOT in hgConvert the developer should be contacted.

After QAing on hgwbeta: Push to and QA on the RR

Push to the RR

Note: for steps 1-3 you may have to do some sneaky/selective pushing that is different from the steps listed if there is already a chain/net on the RR for an older assembly. See Replacing old tables with new ones

1) Make public on beta so that trackDb is completely up-to-date with anyone else's changes.

  • ex: hgwbeta: make public DBS=danRer6

2) Email a push request to copy the three chain/net (chain, net and chain link) tables from mysqlbeta to mysqlrr and also trackDb and friends (also see: [Three State TrackDb]).

  • ex: email: Please push trackDb and Friends and the following tables from the danRer6 database: chainMm9, netMm9, chainMm9Link from mysqlbeta to mysqlrr

If this is not part of a new assembly release, make sure to add the URL for the Release Log in the PushQ. Instructions.

Test on the RR and Add Line to hgcentral

3) Test the chain/Net track on the RR to make sure it is working properly.

4) Add line to hgcentral.liftOverChain from hgcentralbeta.liftOverChain. Use the same steps listed in step 4 above under "Prior to QAing on hgwbeta". Note that you do not need to push the liftOver file as the RR and hgwbeta both have access to hgnfs1.

  • To log into hgcentral from hdwdev: hgsql -h genome-centdb hgcentral

5) Test that hgLiftOver and hgConvert to make sure they are working as expected.

6) Email a push request to copy this file: /usr/local/apache/htdocs-hgdownload/goldenPath/[from database]/liftOver/[from database]To[to database].over.chain.gz and this directory: /usr/local/apache/htdocs/goldenPath/[from database]/vs[to database]/* from hgwdev to hgdownloads so that the public can download these files.

  • Before pushing, check the file as described in New_track_checklist#Downloads.
  • Make sure that the md5sum.txt file has been updated to include the new file, and push along with the liftOver file.
  • ex: email: Please push /usr/local/apache/htdocs-hgdownload/goldenPath/danRer6/liftOver/danRer6ToMm9.over.chain.gz and /usr/local/apache/htdocs-htdownload/goldenPath/danRer6/vsMm9/* from hgwdev to hgdownloads.

7) If tables were dropped on hgwbeta, email pushers to drop the tables on the RR.

Update and push downloads.html

8) To make a link to these new download files change the downloads.html file in your hgdownload source tree.

  • hgwdev (normally in /cluster/home/yourname/hgdownload):vi downloads.html
  • in hgdownloads, do a 'git pull'
  • Find a link under "Pair-wise alignments" to a similar database. Copy it, paste it, and change it so that it points to the new vs directory.
  • do a 'make alpha'
  • view on http://hgdownload-test.cse.ucsc.edu/downloads.html to see your changes, then:
hgwdev> git add downloads.html
hgwdev> git commit -m "msg describing your changes" download.html
hgwdev> git push


9) Your changes should now appear in /usr/local/apache/htdocs-hgdownload/downloads.html

10) Email a push request to copy this file: /usr/local/apache/htdocs-hgdownload/downloads.html from hgwdev to hgdownload, with a note to replace "htdocs-hgdownload" with "htdocs" in the directory path. Once push is complete, check to see that your changes are now on the public downloads page.


The end!